Controller-based Manipulations

While inside StellarX, you’ll notice a laser beam coming out of your controller. It indicates what asset you are pointing at. You can move the laser around freely.

Here’s a few different ways to move assets around.

Controller Layout

Moving an Asset

1. Point your laser beam at an asset, until you see a blue box appear.
2. Press the controller trigger.
3. Move the asset around.

Grabbing an Asset

1. Place your controller on or inside an asset, until you see a blue box appear.
2. Press the controller trigger.
3. Move the asset around.

Rotating an Asset

1. Point your laser beam at an asset, until you see a blue box appear.
2. Press the controller trigger.
3. (While holding the trigger), push the controller joystick left or right to rotate the asset.

Resizing an Asset

1. Point your laser beam at an asset, until you see a blue box appear.
2. Press the controller trigger.
3. While holding the first trigger, press the second one.
4. Move both controllers inward or outward until the asset reaches the desired size.

Moving outward = Larger

Moving inward = Smaller  

Adjusting Distance

1. Point your laser beam at an asset, until you see a blue box appear.
2. Press the controller trigger.
3. (While holding the trigger), push the controller joystick forward or inward to move the asset further or closer to you.